Welcome to E+E Elektronik – the sensor specialist for humidity, CO2, moisture in oil, dew point, air velocity, flow, temperature and pressure.
E+E Elektronik develops and manufactures sensors, transmitters, hand-helds and data loggers for relative humidity, moisture in oil, dew point, air velocity, flow, CO2, temperature and pressure. E+E operates a nationally accredited calibration lab and is appointed to maintain the National Standard for Humidity and Air Flow Speed in Austria.
Humidity sensors and transmitters for process control, HVAC, OEM and mass applications
Dew point sensors / transmitters with auto-calibration for the measurement of low dewpoints.
Moisture in Oil
Oil condition sensors for moisture measurement in insulation, lubrication, transmission and hydraulic oils.
Dual wavelength NDIR CO2 measurement for demand controlled ventilation and process control
Air flow measurement for climatic and clean room technology based on the anemometer principle.
Thermal mass flowmeter for compressed air and non-corrosive gases.
Temperature sensors and transmitters for HVAC and process control.
Accredited calibration services for humidity, temperature, dewpoint, air flow, mass flow, CO2 and pressure.
Multi-range, user configurable differential pressure sensors for HVAC
Robust CO2 Sensor with RS485 Interface
The well proven EE820 sensor from E+E Elektronik is appropriate for reliable monitoring the CO2 concentration in harsh and polluted applications such as agriculture and life stock barns. Beside voltage and current output, the sensor is now also available with RS485 interface with Modbus RTU or BACnet MS/TP protocol.
Heated CO2 Probe with Replaceable Sensing Module
E+E Elektronik’s new EE872 CO2 probe measures CO2 concentration up to 5 % (50000 ppm) and features active pressure and temperature compensation with on-board sensors. The heated, replaceable CO2 sensing module and the long-term stable dual wavelength NDIR operation principle lead to outstanding measurement performance even under harsh and condensing conditions.
Highly Accurate Mass Flow and Dew Point Sensors for Compressed Air Monitoring
Thermal flow meters from E+E Elektronik accurately measure the compressed air consumption in pipes from DN15 to DN700. They are suitable for leak detection and thus contribute relevantly to cost reduction. High-precision E+E sensors monitor the dew point temperature and the risk of condensation in the compressed air network. This leads to safe operation and maximizes the lifetime of tools and machines.